Non-slip quilted sewing machine mat.
Armistice Day 2014
Another busy day in the bunker. I had to finish off three quilts before I could play with a brilliant pattern using a Moda jelly roll! Here is the link to the Moda pattern I modified - http://www.modabakeshop.com/2011/02/woven-jelly-roll-rug.html
I used Avant Garden by MoMo, really bright and cheerful - especially good on such a dull, glum and grey day!
I needed a quilted mat for under my sewing machine and after struggling to keep the machine in one place whilst I was pushing the quilts through it had to be non-slip too! Perfect time to play with this pattern! I used 2oz polyester wadding, non-slip lining and some white linen sheeting.
I worked out that I wanted a mat approx 40cm x 30cm - so I cut my non-slip lining, wadding and linen sheet all 40cm x 30cm. Following the instructions I pressed and cut 9 x 40cm strips and 12 x 30cm strips.
Stitched,
pinned
and stitched!
Then the fun part, paper weaving with fabric..
As advised - good advise - I pinned and zigzagged a few rows at a time.
I was very tempted to leave it like this! But, once all the cross strips were sewn it was time to do the lengths - this is where I added the wadding and stitched the top onto it.
Lots of pins!!
A shortage of photos from here - once the front was stitched to the wadding I squared everything off and pinned the non-slip lining to the back, made up enough binding to do the edges and ..
all bound, pressed and most importantly..
non-slip!
It works like a dream, I am so pleased with it and the Moda pattern was fantastically easy to follow - the link again - http://www.modabakeshop.com/2011/02/woven-jelly-roll-rug.html.
If you have any questions please comment below, or if you just fancy introducing yourself it would be wonderful to hear from you. Please link back to here if you use any part of this post. I can also be found burbling away at www.facebook.com/BeadsBraidsAndBows.
Thank you so much for reading all the way to here! Have a wonderful day. Loves & Hugs. Lor.xx
No comments:
Post a Comment